R&R R-120
R120 has a cyclone collects the chaffs that comes from the roasted beans. The beans that come into the cooling bin are separated from the chaffs before drop and after cooling down can be processed immediately. You don’t have to clean the chaffs out of the roaster between roasting, because the cyclone is external. It is also easier to clean the coffee roaster when using an external cyclone.
R&R Roaster a You can roast sequentially without brake. Chaff collector needs to be clean after number of roasts.nd Roaster R120 coffee roaster has been designed for optimal and high efficiency heat transfer and distribution. Our sophistication on coffee roasting brings the unique drum design which has homogenous, constant and stable bean roasting at each batch.
R120 has industrial motors and equipment for long lasting and heavy-duty roasting process. You can run the machine for 24 hours 7 days.
Low Nox Premix Burner operates with the lowest emissions. and highest performance of available burners. Power and energy are worldwide concerns for environmental health. Five global environmental problems exist: climate change, acidification, eutrophication ( atmospheric deposition, urban air quality, and tropospheric ozone. NOx is one of the important pollutants in the above environmental problems. R120 is equipped with the most efficient premix gas burner. Our burner is a clean heating source, providing maximum efficiency in gas burning and minimal emissions of Carbon Monoxide. It is safe, economical and stable, the flame control parameters allow complete control over your roast. Digital control unit allow you to increase or decrease the flame (thermal power).
R120 is equipped with USB Modbus data-logging connection. Ready for Artisan. It has thermocouples to record bean temperature and exhaust temperature.
Control panel has digital thermostat for both drum and exhaust thermocouples to set and monitor temperatures.
Dimensions
Sizes w x l x h : 345x370x355cm
Exhaust pipe diameter : Ø219,1mm
Electrical Service Requirements
Voltage & Frequency : Three Phase 380 / 400 50hz 60hz
Power : 14kw/h
Electric Current (Ampere) : 35A
Airflow
Exhaust airflow :650m3/h
Cooler airflow :900m3
Capacity
Batch Size : 120kg/batch
Production : 480kg/h
Fuel
Fuel type : Propane, LPG, Natural Gas, Electricity
Gas pressure requirement : NG 20Mbar – Propane, LPG 30mbar
Source Gas Pressure : 1-4bar
Data Logging
Artisan Connection : USB
Gas consumption
Thermal Power | Gas Consupmtion | Gas Pressure | |||
G20 | 5,21-0,68 | m3/h | 20mbar | ||
13-100 KW/h | G30 | 7,78-1,01 | kg/h | 30mbar | |
G31 | 7,50-0,95 | kg/h | 37mbar |
Reviews
There are no reviews yet.